HLM G277 Eye Bolt with Washer and Nut , Stainless Steel | Size: 1/4*2 to 1-1/4*15 | Industrial-Grade Anti-Vibration Anchoring
$0.01HLM INDUSTRY G277 Eye Bolt with Washer and Nut
Vibration-Damping Fastening and Multi-Plane Load Stabilization for Critical Structural Connections in Severe Service Environments.
- Material:grade 316 or 304 stainless steel
- Thread Series: UNC
- Size: 1/4*2 to 1-1/4*15
- Technique Procedure:Cast
- Finish: Polished
- High-Quality Stainless Steel: Built with corrosion-resistant 304/316 stainless steel, making it suitable for marine and outdoor use.
HLM G279 Eye Bolt, Stainless Steel | Size: 1/4*1 to 1-1/2*3-1/2 | Marine-Grade Shoulder Anchor
$0.01HLM INDUSTRY G279 Eye Bolt
A heavy-duty lifting solution precision-forged from marine-grade stainless steel, delivering unmatched corrosion resistance. Its integrated shoulder design ensures proper load distribution while preventing material deformation, creating a certified anchor point for critical overhead lifting applications.
- Material:grade 316 or 304 stainless steel
- Size: 1/4*1 to 1-1/2*3-1/2
- Technique Procedure:Cast
- Finish: Polished
- High-Quality Stainless Steel: Built with corrosion-resistant 304/316 stainless steel, making it suitable for marine and outdoor use.
HLM G340 & S340 Weldless End Links, WLL Range from 1130kg to 13,610kg Self Colored or Hot Dip galvanized.
$0.01HLM INDUSTRY – A-341 Alloy Pear Shaped Links
- Alloy Steel – Quenched and Tempered.
- Individually Proof Tested at 2 times Working Load Limit with certification.
- Proof Test certification shipped with each link.
- Sizes 13mm, 16mm, 19mm, 22mm, 25mm, 32mm and 35mm are forged.
HLM G403 Forged Clevis Chain Swivel, WLL Range from 390kg to 20,500kg Made by drop forged, hot dipped galvanized mild carbon steel
$0.01HLM INDUSTRY – G-403 Jaw End Swivels
G-403 Jaw End Swivels meet the performance requirements of Federal Specification RR-C-271F, Type VII, Class 3, except for those provisions required of the contractor.
- Hot Dip Galvanized
- Quenched & Tempered
- HLM products meet or exceed all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- 401, 402 and 403 swivels are positioning devices and are not intended to rotate under load. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.10.4(b)(5)(c)2009.
HLM G80 Container Lifting Clevis Link, For Heavy-Lift Security and Load-Path Integrity
$0.01HLM INDUSTRY G80 Container Lifting Clevis Link
Engineered for heavy-load container lifting, our G80 Container Lifting Clevis Links ensure secure connection and load path integrity in demanding handling systems. Available in multiple capacity ratings to accommodate various lifting requirements, these durable links are forged from alloy steel with quenched and tempered treatment for extreme-condition reliability. Custom configurations can also be produced to meet specialized lifting and safety requirements.
Heavy-Lift Load Security – Ensures safe container handling and precise load distribution under extreme lifting conditions.
Forged Alloy Integrity – Quenched and tempered steel construction maintains structural strength under dynamic and shock loads.
Corrosion-Resistant Endurance – High-grade alloy coating withstands marine environments and harsh weather exposure.
Multi-Rigging Versatility – Compatible with spreader bars and lifting systems, enabling adaptable configurations for various container sizes.
HLM G80 Rigging Hardware European Ratchet Type Chain Lifting Load Binders with Shortening Grab Hooks and Locking Pins ELBH type
$0.01HLM INDUSTRY – G80 Ratchet Load Binder
Grade 80 Ratchet Load Binder with Shortening Grab Hooks and Locking Pins, ELBH type
A ratchet type load binder is a mechanical device used to secure cargo or loads on trucks, trailers, or other transportation vehicles. It is also known as a ratchet binder, cargo binder, or load tensioner. The ratchet binder consists of a ratcheting mechanism with two hooks at each end. One end is connected to the anchor point on the truck or trailer, while the other end is connected to the load. The ratchet mechanism is used to tighten the binder, creating tension on the load and securing it in place.
- Conforms to EN 12195-3.
- Ratchet loadbinder with winged grab hook and safety pin device.
- Used for tensioning chain in lashing applications.
- Grab hooks supplied with safety pin locking device to enhance operational safety. MBL equals 2 x lashing capacity.
- The closed body design protects the threads from damage and prevent dirt from entering into the body.
- Hooks are equipped with safety pins to prevent unintentional unhooking.
- Safety device prevents unintentional unscrewing.
- Marking: size, lashing capacity, “Not for lifting”, batch No., EN 12195-3
- Warning: Not For Lifting.
HLM Galvanized Bar Ties, For Corrosion-Resistant Tying and Structural Integrity Assurance
$0.01HLM INDUSTRY Galvanized Bar Ties
HLM Galvanized Folding Grapnel Boat Anchor Made from corrosion resistant hot dipped galvanized steel.
$0.01HLM INDUSTRY – Stainless Steel Folding Anchor
Galvanized Folding Grapnel Boat Anchor Its foldable design allows for easy storage, minimizing space usage on deck or in storage compartments. Each model is crafted to offer maximum holding power with minimal weight, ensuring easy handling and effective anchoring.
- Made from corrosion resistant hot dipped galvanized steel.
- Locking ring locks the anchor either open or closed.
- Great for kayaks, dinghies, canoes, and other small craft.
- Most suited to rocky bottoms.
HLM Galvanized Steel Rebar Tie Wire, For Corrosion-Resistant Tying and Structural-Grade Fastening
$0.01HLM INDUSTRY Galvanized Steel Rebar Tie Wire
Galvanized Tie Wire ensures lasting rebar durability by providing both physical stability during installation and corrosion protection in harsh environments.
- Corrosion Resistance Assurance: Hot-dip zinc coating provides long-term rust protection in wet and chemical-exposed environments.
- Structural Fastening Reliability: High-carbon steel core ensures consistent tensile strength for secure rebar connections under heavy loads.
- Harsh Environment Durability: Withstands extreme job site conditions without degradation, suitable for marine and industrial projects.
- Cost-Effective Installation: Pre-galvanized coils allow direct use without additional treatment, reducing labor and maintenance costs.
HLM Gate Hinge Bolts, Heavy-Duty Multi-Point Pivoting System with Impact Resistance
$0.01HLM INDUSTRY Gate Hinge Bolts
Gate hinge bolts primarily serve to pivot and support gates in access control systems. While their main application is in swinging gate operations, they also function as durable fasteners for high-movement hardware. Additional uses include reinforcing fence panel hinges, securing industrial door mounts, and acting as load-bearing pivots in barrier mechanisms.
- Heavy-Duty Pivot Bolts: Gate hinge bolts are engineered as high-strength, forged steel pivots for frequent swinging motion.
- Precision Machining Process: Their manufacturing involves CNC threading and heat treatment, ensuring smoother operation and longer service life than standard hinge bolts.
- Reliable Access Control: Once installed, they provide smooth pivotal movement and high load-bearing capacity for gates in high-traffic access points.
HLM Grade 100 A-1345N Master Link Assembly Engineered Flat for use with S-1325A coupler link Engineered Flat for use with S-1325A coupler link.
$0.01HLM INDUSTRY – Grade 100 A-1345N Master Link Assembly
- Alloy Steel – Quenched and Tempered.
- Individually proof tested to values shown with certification.
- Proof tested with fixture sized to prevent localized point loading per ASTM A952.
- Proof test certification shipped with each link.
- All sizes are forged.
- Engineered Flat for use with S-1325A coupler link.
HLM Grade 100 Alloy Steel Chain, Heat Treated | Overhead Lifting Applications
$0.01HLM INDUSTRY Grade 100 Alloy Steel Chain
Alloy Steel.
Heat Treated.
25% stronger than Grade 80 Alloy Chain.
Grade 100 chain is tempered at a lower temperature than Grade 80 chain
Permanently embossed with CG (HLM Group) and 10 (Grade).
Finish – Black rust preventative coating.
Proof Tested at 2 times the Working Load Limit with certification.
Standard container – fiber drum.