HLM Hex Coil Nut, Size:1/2″ to 1″ | Weight:0.0318 – 0.1996KG | Vibration-Resistant Structural Nut
$0.01HLM INDUSTRY Hex Coil Nut
Hex Coil Nuts are specifically designed as high-strength, vibration-resistant fasteners for critical structural and mechanical assemblies.
- Size:1/2″ to 1″
- Weight:0.0318 – 0.1996KG
- High-Torque Ready – Supports strong, even clamping for reliable joints.
- Wide Compatibility – Fits standard hex bolts across industries.
- Quick Installation – Hex shape allows fast hand or tool assembly.
- Internationally Certified – Meets ISO, DIN, and ASTM standards.
HLM Hex Nut Connector, Diameter: D15mm | Ultimate Load: Over 180kn | Ductile Iron Casting Formwork Hex Nut
$0.01HLM INDUSTRY Hex Nut Connector
Hex nuts (or hex couplers) are used in formwork tie rod systems as narrow-space alternatives to wing nuts, while connection nuts join two steel tie rods end-to-end.
- Material:Ductile Iron Casting
- Surface Treatment:Galvanized or as Nature
- Color:Gold, Silver or Black
- Ultimate Load: Over 180kn
- Hex Nut Usage:Primarily used in construction formwork systems as a compact alternative to wing nuts in tight or narrow access areas.
- Connection Nut Function:Specifically designed to join two threaded steel tie rods end-to-end, extending their length and maintaining alignment.
- Material and Weldability:Made of weldable steel, allowing for secure attachment to other steel components when required.
HLM Hex Nut Connector, Diameter: D15mm/D20mm | Machining Weldable Formwork Hex Nut Connector
$0.01HLM INDUSTRY Hex Nut Connector
Hex nuts (or hex couplers) are used in formwork tie rod systems as narrow-space alternatives to wing nuts, while connection nuts join two steel tie rods end-to-end.
- Material: Steel
- Surface Treatment:Galvanized or Black
- Color:Black,Silver or Gold
- Hex Nut Usage:Primarily used in construction formwork systems as a compact alternative to wing nuts in tight or narrow access areas.
- Connection Nut Function:Specifically designed to join two threaded steel tie rods end-to-end, extending their length and maintaining alignment.
- Material and Weldability:Made of weldable steel, allowing for secure attachment to other steel components when required.
HLM HG-223 Hook and Hook Turnbuckle, Hot Dip galvanized steel | WLL: 400-5,000lb | Body Has UNC Threads
$0.01HLM INDUSTRY HG-223 Hook and Hook Turnbuckle
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Hot Dip galvanized steel.
- Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads.
- Fatigue Rated.
- Meets or exceeds all requirements of ASME B30.26 including identificatio , ductility, design factor, proof load and temperature reauirements. lmportantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 — CLASS 5, and ASTM F-1145, except for those provisions required of the contractor.
- Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
HLM HG-223 Hook and Hook Turnbuckle, Hot Dip galvanized steel | WLL: 400-5,000lb | Body Has UNC Threads
$0.01HLM INDUSTRY HG-223 Hook and Hook Turnbuckle
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Hot Dip galvanized steel.
- Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads.
- Fatigue Rated.
- Meets or exceeds all requirements of ASME B30.26 including identificatio , ductility, design factor, proof load and temperature reauirements. lmportantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 — CLASS 5, and ASTM F-1145, except for those provisions required of the contractor.
- Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
HLM HG-225 Hook and Eye Turnbuckle, Hot Dip galvanized steel | WLL: 400-5,000lb | Weight: .31-13.9lb
$0.01HLM INDUSTRY HG-225 Hook and Eye Turnbuckle
- End fitings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Hot Dip galvanized steel.
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4″ through 1″, a shackle one size smaller can be reeved through eye.
- Turnbuckle hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Modified UNJ thread on end fittings for improved fatigue propertie
- Body has UNC threads.
- Fatique Rated.
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. lmportantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 — CLASS 6, and ASTM F-1145, except for those provisions required of the contractor.
- Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
HLM HG-225 Hook and Eye Turnbuckle, Hot Dip galvanized steel | WLL: 400-5,000lb | Weight: .31-13.9lb
$0.01HLM INDUSTRY HG-225 Hook and Eye Turnbuckle
- End fitings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Hot Dip galvanized steel.
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4″ through 1″, a shackle one size smaller can be reeved through eye.
- Turnbuckle hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Modified UNJ thread on end fittings for improved fatigue propertie
- Body has UNC threads.
- Fatique Rated.
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. lmportantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 — CLASS 6, and ASTM F-1145, except for those provisions required of the contractor.
- Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
HLM HG-226 Eye and Eye Turnbuckle, Hot Dip galvanized steel | UNJ Thread for Enhanced Fatigue Resistance | WLL: 500-75,000lb
$0.01HLM INDUSTRY HG-226 Eye and Eye Turnbuckle
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing
- Hot Dip galvanized steel.
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4″ through 2-1/2″, a shackle one size smaller can be reeved through eye.
- Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC thread
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Fatique Rated.
- Meets or exceeds all reguirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature reguirements. lmportantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
- Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 — CLASS 4, and ASTM F-1145, except for those provisions required of the contractor.
- Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
HLM HG-226 Eye and Eye Turnbuckle, Hot Dip galvanized steel | UNJ Thread for Enhanced Fatigue Resistance | WLL: 500-75,000lb
$0.01HLM INDUSTRY HG-226 Eye and Eye Turnbuckle
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing
- Hot Dip galvanized steel.
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4″ through 2-1/2″, a shackle one size smaller can be reeved through eye.
- Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC thread
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Fatique Rated.
- Meets or exceeds all reguirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature reguirements. lmportantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
- Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 — CLASS 4, and ASTM F-1145, except for those provisions required of the contractor.
- Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
HLM HG-227 Jaw and Eye Turnbuckle, Forged Elongated Eyes for Easy Attachment & Reduced Stress | Hot Dip galvanized steel | Weight: .33-187lb
$0.01HLM INDUSTRY HG-227 Jaw and Eye Turnbuckle
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Hot Dip galvanized steel.
- Turnbuckles eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles size 1/4″ through 2-1/2″, a shackle one size smaller can be reeved through eye.
- Forged jaw ends are fitted with bolts and nuts for 1/4″ through 5/8″, and pins and cotters on 3/4” through 2-3/4″sizes.
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads.
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Fatique Rated.
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor,proof load and temperature requirements. lmportantly, these turnbuckles meet other critical performance reguirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 — CLASS 8, and ASTM F-1145, except for those provisions required of the contractor.
- Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
HLM HG-227 Jaw and Eye Turnbuckle, Forged Elongated Eyes for Easy Attachment & Reduced Stress | Hot Dip galvanized steel | Weight: .33-187lb
$0.01HLM INDUSTRY HG-227 Jaw and Eye Turnbuckle
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Hot Dip galvanized steel.
- Turnbuckles eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles size 1/4″ through 2-1/2″, a shackle one size smaller can be reeved through eye.
- Forged jaw ends are fitted with bolts and nuts for 1/4″ through 5/8″, and pins and cotters on 3/4” through 2-3/4″sizes.
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads.
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Fatique Rated.
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor,proof load and temperature requirements. lmportantly, these turnbuckles meet other critical performance reguirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 — CLASS 8, and ASTM F-1145, except for those provisions required of the contractor.
- Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
HLM HG-228 Jaw and Jaw Turnbuckle, Hot Dip galvanized steel | Proof Load: 2.5×WLL | Ultimate Load: 5×WLL
$0.01HLM INDUSTRY HG-228 Jaw and Jaw Turnbuckle
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Hot Dip galvanized steel.
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Forged jaw ends are fitted with bolts and nuts for 1/4″ through 5/8″, and pins and cotters on 3/4″ through 2-3/4”sizes.
- Modified UNJ thread on end fittings for improved fatigue propertieBody has UNC threads.
- Fatigue Rated.
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature reguirements. lmportantly, these turnbuckles meet other critical performance reguirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.