HLM G-2140/S-2140 Alloy Bolt Type Anchor Shackle , 3/8″ – Hot Dip Galvanized – 2t- 175t capacity
$0.01HLM INDUSTRY G2140/S2140 Alloy Shackle
Crosby G-2140 Alloy Bolt Type Anchor Shackles meet or exceed all requirements of ASME B30.26 including identification, ductility , design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
Features:
- Approved for use at -40° C (-40° F) to 204° C (400° F)
- Forged Alloy Steel – Quenched and Tempered, with alloy pins
- Working Load Limit permanently shown on every shackle
- Meets the performance requirements of Federal Specification RR-C 271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor
Specifications:
- Size (Shackle Body Thickness): 3/8″
- Throat Opening (Width Between Ears): 0.66″
- Throat Depth: 1.44″
- Pin Size: 0.44″
- Pin Type: Bolt, Nut, & Cotter
- Finish: Hot Dip Galvanized
- Material: Alloy Steel Body & Alloy Steel Pin
- Working Load Limit: 2.00 tons (4000 lbs)
HLM G-215/S-215 Round pin chain Shackle, 2,000 lb Working Load Limit, 21/32 in Wd Between Eyes, Carbon Steel
$0.01HLM INDUSTRY G215/S215 Shackle
- Capacities 1/2 through 35 metric tons.
- Forged – Quenched and Tempered, with alloy pins.
- Working Load Limit permanently shown on every shackle.
- Hot Dip galvanized or Self Colored.
- Fatigue rated.
- Shackles 25t and larger are RFID EQUIPPED.
HLM G-2150/S-2150 bolt type chain Shackle, Chain Shackle, 6,500 lb Working Load Limit, 1 1/16 in Wd Between Eyes, Silver, Red
$0.01HLM INDUSTRY G2150 Shackle
- Working Load Limit and Grade 6 permanently shown on every shackle
- Forged, Quenched & Tempered, with alloy pins
- Hot-dip galvanized (G)
- 85 ton shackles have hot-dip galvanized bows and the bolts are Dimetcoted® and painted red
- Sizes 3/8″ and below are mechanically galvanized
- Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit (1/2t – 55t)
- Shackles 25t and larger are RFID equipped
- Approved for use at -40° C (-40 degrees F) to 204° C (400° F)
- Meets or exceeds all requirements of ASME B30.26
- Sizes 1/2 – 25t meet the performance requirements of EN13889:2003
- Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order
- Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance; certificates available when requested at time of
order and may include additional charges - Meets the performance requirements of Federal Specification RR-C-271G, Type IVB, Grade A, Class 3,except for those provisions required of the contractor
- All 2150 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg at -20° C (-4° F) upon special request
HLM G-2160 – Alloy Bolt Type Wide Body Shackles – 300T WLL | G-2160 – 75 Ton Sling Shackle
$0.01HLM INDUSTRY G2160 Shackle
This wide-bodied shackle boasts a nuts-and-cotter-keys closure for use on slings requiring increased surface area. Its durable steel construction offers maximum strength and durability, making it an ideal choice for all types of rigging applications.
- Made in the USA
- Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates the need for a thimble. Greatly improves the life of your sling
- Can be used to connect synthetic web slings, synthetic round slings or wire
rope slings - All sizes Quenched & Tempered for maximum strength.
- Hot Dip Galvanized
- Working Load Limit permanently shown on every shackle
- RFID equipped
- • Approved for use at -40° C (-40° F) to 204° C (400° F).
HLM G-2160E Easy-Loc Wide Body Shackle – Hot Dip Galvanized G-2160 Wide Body Sling Shackle – 7 Ton WLL
$0.01HLM INDUSTRY G2160E Shackle
Crosby G-2160 Bolt Type Wide Body Shackles have an increased shackle bow radius which provides a minimum 58% gain in sling bearing surface and eliminates the need for a thimble. Crosby Wide Body Shackles greatly improve the wearability of high strength round slings, wire rope slings, and synthetic web slings. Equipped with the Easy-Loc V2 shackle bolt which reduces install/release times by up to 90%. Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Features:
- Forged alloy steel – quenched and tempered for maximum strength
- Individually proof tested and magnetic particle inspected
- Increases usable sling strength minimum of 15% and greatly improves life of wire rope slings
- Approved for use at -40°C (-40°F) to 204°C (400°F)
Specifications:
- Size (Shackle Body Thickness): Wide Body 200 ton
- Throat Opening (Width Between Ears): 5.91″
- Throat Depth: 18.91″
- Pin Size: 4.12″
- Pin Type: Crosby Easy-Loc V2 Tm Pin
- Finish: Hot Dip Galvanized
- Material: Alloy Steel Body & Alloy Steel Pin
- Working Load Limit: 200.00 tons (400,000 lbs)
- Standards & Certifications: ASME B30.26 (identification, ductility , design factor, proof load and temperature requirements)
- USA
HLM G-2169/S2169 Alloy Screw Pin “wide body” Shackle 7 Ton – Painted Wide Body Shackle, 36,000 lb, Alloy Steel
$0.01HLM INDUSTRY G2169/S2169 Alloy Screw PIN “WIDE BODY” Shackle
G2169/S2169 Alloy Screw Pin Wide Body Shackles significantly improves the life of wire rope slings. They can be used to connect high strength round slings, synthetic round slings or wire rope slings. The increase in shackle bow radius provides minimum 58% gain in sling bearing surface. Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Features:
- Forged alloy steel – quenched and tempered for maximum strength
- Individually proof tested and magnetic particle inspected
Specifications:
- Size (Shackle Body Thickness): Wide Body 7 ton
- Throat Opening (Width Between Ears): 1.25″
- Throat Depth: 3.56″
- Pin Size: 0.88″
- Pin Type: Screw Pin
- Finish: Painted
- Material: Alloy Steel Body & Alloy Steel Pin
- Working Load Limit: 7.00 tons (14,000 lbs)
- Standards & Certifications: ASME B30.26 (identification, ductility , design factor, proof load and temperature requirements)
HLM G-291 Regular Nut Eye Bolts Self Color, Galvanized or Stainless Steel Furnished with standard Hot Dip galvanized hex nuts.
$0.01HLM INDUSTRY – G-291 Regular Nut Eye Bolts
- Forged Steel — Quenched and Tempered.
- Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
- All Bolts Hot Dip galvanized after threading (UNC).
- Furnished with standard Hot Dip galvanized hex nuts.
- Recommended for in-line pull.
- Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these bolts meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
HLM G-3315 Snap Hook, 750lb-1000lb Load | Carbon Steel Forged Hook | Hook Body — Galvanized
$0.01HLM INDUSTRY G-3315 Snap Hook
Forged Carbon Steel — Quenched and Tempered.
Pressed steel latches and stainless steel springs, bolts and nuts.
For replacement latch kit, order Stock No. 9900299.
Hook Body — Galvanized.
HLM G-341 / S-341 Weldless Sling Links Forged carbon steel – Quenched and Tempered Self Colored or Hot Dip galvanized.
$0.01HLM INDUSTRY – G-341 / S-341 Weldless Sling Links
G-341 Weldless Sling Links (Pear Links) are forged from carbon steel – Quenched and Tempered.
- Size: 1/2″
- Working Load Limit (WLL): 2900 lbs
- Inside Width: 1.00″ x 2.00″
- Inside Length: 3.00″
- Finish: Hot Dip Galvanized
- 6:1 design factor
HLM G-400 Eye Nut, Quenched and Tempered Forged Steel, Hot-Dipped Galvanized| Various Sizes and Working Load Limits
$0.01HLM INDUSTRY – G-400 Eye Nut
G-400 Eye Nuts are made of high quality drop forged steel and meet or exceed all requirements of ASME B3026, including identification, ductility, design factor, proof load and temperature requirements. Loads are based on a safety factor of 5 to 1.
Note: Load shown applies to Eye Nut only, based on a vertical pull, and not to any connecting bolt or stud.
Specifications:
- Bail Stock Size: 1/4″
- Tap Size: 1/4″-20
- Working Load Limit: 520 lbs
- Finish: Hot Dip Galvanized
- Material: Forged Steel
- Design Factor: 5:1
- Thread Type: Tapped with standard UNC class 2 threads after galvanizing
- Standards: Meets or exceeds all requirements of ASME B3026
HLM G-401 Chain Swivels / G-402 Regular Swivels Drop Forged , Machining , Quenched and Tempered Hot Dipped Galvanized
$0.01HLM INDUSTRY – G-402 Regular Swivels
G-402 Regular Swivels meet the performance requirements of Federal Specification RR-C-271F, Type VII, Class 2, except for those provisions required of the contractor.
- Hot Dip Galvanized
- Quenched & Tempered
- Crosby products meet or exceed all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- 401, 402 and 403 swivels are positioning devices and are not intended to rotate under load. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.10.4(b)(5)(c)2009.
HLM G-408 Open Pattern Wire Rope Thimbles, Hot Dip galvanized steel | Rope Size:6-16mm | Weight:3.00-25.00lb
$0.01HLM INDUSTRY G-408 Open Pattern Wire Rope Thimbles
Hot Dip galvanized Steel.
Recommended for light duty applications in which it is being assembled into another fitting (i.e., shackle or master link).