HLM Flared Thin Slab Ferrule Insert, Thread: 1/2″-13 to 1″-8 NC | SWL Tension: 2,210-6,780 lbs | Shallow-Depth NC Thread Anchoring
$0.01HLM INDUSTRY Flared Thin Slab Ferrule Insert
The Flared Thin Slab Coil Insert provides shallow-depth anchoring with a sealed end to prevent concrete clogging, exclusively accepting NC-threaded bolts for thin precast applications where space is constrained.
- Material: Carbon Steel
- Surface:Zinc Plating
- Thread: 1/2″-13 to 1″-8
- SWL Tension: 2,210-6,780 lbs
- Enhanced Tensile Capacity: Widened base enlarges concrete shear cone, boosting tensile strength without deeper embedment.
- Optimized Load Distribution: Expanded coils disperse loads across broader concrete volume, reducing stress concentration.
- Adaptable Length Options: Custom lengths suit varying concrete thicknesses and load demands.
- Space-Efficient Design: Shallow embedment fits thin slabs; lateral expansion enables high-strength anchoring.
HLM Flared Thin Slab Wing Nut Style Coil Insert, Bolt Diameter: 1/2″ to 1-1/2″ | SWL Tension:950-4,750 lbs | Wide-Span Wing Nut Anchoring for Thin-Slab Applications
$0.01HLM INDUSTRY Flared Thin Slab Wing Nut Style Coil Insert
Flared Thin Slab Wing Nut Style Coil Insert enables tool-free shallow-depth anchoring with an open-end design for visual verification, exclusively accommodating wing nuts for rapid hand-tightened operation in space-constrained thin precast applications.
- Bolt Diameter: 1/2″ to 1-1/2″
- SWL Tension: 950-4,750 lbs
- Application Scope: Designed specifically for very thin concrete slabs or applications with strict depth limitations where longer inserts are unsuitable.
- Installation Requirements: Must be recessed ½” from the concrete surface with a minimum of ¾” concrete cover beneath the insert.
- Layout Specification: Minimum spacing between inserts shall be twice the corner distance.
HLM Flat Foot Anchor, Size: 2T×2-3/4″ to 3T×3-3/4″ | SWL Tension: 4,000-6,000 lbs | Design for High-Strength Base Plate Connections
$0.01HLM INDUSTRY Flat Foot Anchor
Flat Foot Anchor enables the back-stripping, transport, and erection of thin panels, with a safe working load that can be increased using additional rebar reinforcement.
- Size: 2T×2-3/4″ to 3T×3-3/4″
- SWL Tension: 4,000-6,000 lbs
- Product Profile: Low-profile anchor for high-strength, non-slip base connections.
- Load Enhancement: Full-surface contact ensures maximum load transfer without reinforcement.
- Customization: Available in custom lengths and base plate configurations.
HLM Flat Head Pin, For Seamless Architectural Formwork Alignment| Size:71g
$0.01HLM INDUSTRY Flat Head Pin
Essential components for aluminum formwork systems, available in multiple configurations (Flat Head, Round Head, and Combo Filler Pins) with curved or straight wedges. Compatible with both full ties and nominal ties to securely fasten aluminum formwork panels during wall concrete pours.
- Material:Steel #45
- Feature:Heat Treatment
- Size:71g
- Packing:250pcs/pail, 64pails/crate, Other packing supporting
- Performance Benefits:Flush-Surface Force Distribution, Zero-Play Engagement for Mirror-Finish Concrete Formwork
HLM Flat I-Beam Steel Nail Stake, Size: 1-1/2″×12″ to 1-1/2″×36″ | For High-Bearing Load Support and Lateral Rigidity
$0.01HLM INDUSTRY Flat I-Beam Steel Nail Stake
Steel stakes primarily serve to anchor lumber or metal concrete forms during flatwork construction. While their main application is in concrete forming, they also function as versatile tools for general purposes. Additional uses include supporting screed bar brackets for slab finishing, securing landscape timbers, and acting as surveying markers.
- Size: 1-1/2″×12″ to 1-1/2″×36″
- Finished: Black painted & oil quenched
- Available without holes for nail stake
- Structural Load-Bearing Capacity: Designed with an H-profile rib structure for high vertical load support and lateral rigidity in deep stabilization.
- Material & Durability: Fabricated from high-strength structural steel, resistant to deformation and corrosion for long-term reusable performance.
- Versatile Application: Suitable for heavy-duty formwork bracing, retaining wall anchoring, and permanent structural foundation systems.
HLM Flat Rib Washer, Size: 105×50×3mm to 150×50×3mm | Weight: 0.12-0.18KG | For Even Surface Pressure and Spacer Integrity
$0.01HLM INDUSTRY Flat Rib Washer
Form Tie System Rib Washers are reusable accessories that prevent formwork breakage and ensure concrete surface integrity by distributing pressure evenly during construction.
- Size: 105×50×3mm to 150×50×3mm (Size Can Be Customized)
- Weight: 0.12-0.18KG
- Primary Function:Prevent formwork breakage during concrete pouring. Ensure concrete surface integrity (prevents discoloration and damage). Distribute load evenly to enhance formwork stability.
- Benefits:Reusable design (excluding the separator cast into the wall). Easy assembly and removal, reducing labor time and costs.Cost-effective by minimizing formwork replacement and repair expenses.
- Key Feature:Compatible with standard form tie systems for modular construction.
HLM Flat Stacking Ties, For Space-Saving Stacking and Cross-Tie Stability
$0.01HLM INDUSTRY Flat Stacking Tie
Snap Ties are produced with built-in heads and come with either metal or plastic form spreaders. These ties are specifically engineered for quick and secure fastening of lumber formwork systems. They feature a standard 1-inch breakback design and include an anti-rotation mechanism to ensure clean breaking after concrete pouring.
- Material:Steel
- Rolled Steel Construction: Featuring low-profile, cold-formed steel bodies (no welds), these stacking ties offer space-efficient storage and cross-bracing support for high-density formwork systems.
- Uniform Load Distribution: Designed with flat, symmetrical profiles to evenly distribute lateral forces and prevent localized stress concentrations, ensuring formwork stability.
- Performance Benefits: Space-optimized stacking, corrosion-resistant coatings, and compliance with high-density formwork layout requirements in commercial and civil projects
HLM Flat Steel Anchor (SFS), Length: 30-117mm | WLL: 0.5-12.5T | Low-Profile Corrosion-Resistant Design for Secure Anchoring in Thin Precast Concrete Panels
$0.01HLM INDUSTRY Flat Steel Anchor
The Flat Steel Anchor is designed for face-mount installation on slabs. Among all threaded anchors, it enables the thinnest possible concrete components to be used in this configuration.
- Length: 30-117mm
- WLL: 0.5-12.5T
- Electro-galvansied and Hot-dip Galcanised is Available.
- 20#,Q345B,Q345D and Stainless Steel is Available.
- Length Can Be Customized.
- Safety Factor: 3.
HLM Flat Steel Nail Stake, Size: 12″ to 48″ | Weight: 0.72-2.93KG | For Surface-Level Stabilization and High Withdrawal Efficiency
$0.01HLM INDUSTRY Flat Steel Nail Stake
Steel stakes primarily serve to anchor lumber or metal concrete forms during flatwork construction. While their main application is in concrete forming, they also function as versatile tools for general purposes. Additional uses include supporting screed bar brackets for slab finishing, securing landscape timbers, and acting as surveying markers.
- Size: 12″ to 48″
- Weight: 0.72-2.93KG
- Finished: Black painted & oil quenched
- Available without holes for nail stake
- Point: C-type or V-type
- Surface Grip Efficiency: Designed with a flat blade profile for enhanced soil contact and anti-slip performance in shallow stabilization.
- Material & Handling: Made of high-strength rolled steel, resistant to bending and corrosion, allowing easy extraction and reuse.
- Versatile Application: Ideal for temporary fencing, landscape edging, and lightweight formwork securing.
HLM Flat Tie, Thickness:1.6mm-2.5mm | Length:L120mm-L800mm | High-Strength Formwork Connection
$0.01HLM INDUSTRY Flat Tie
Wall ties and wedge bolts (including wedge pins) are used together with flat ties to lock adjacent concrete formwork panels, ensuring a rigid and secure connection between the flat tie and the formwork structure.
- Thickness:1.6mm-2.5mm
- Length:L120mm-L800mm
- Package:10,000pcs/pallet
- Performance Benefits:Balanced Load Distribution, Slim-Profile Integration for Precision Concrete Finishes
HLM Flat Washer, Galvanized or as Nature | Formwork Tie Rod System | Durable Wood-to-Concrete Anchoring Solution
$0.01HLM INDUSTRY Flat Washer
This washer ensures a secure connection with reinforced design to prevent pull-through. Its enlarged surface evenly distributes pressure, preventing wood splitting. Ideal for wood-to-concrete anchoring, it offers durable structural stability.
- Material:Carbon Steel
- Hole: Round or Slotted
- Feature:Galvanized or as Nature
- Performance Benefits:Uniform-Load Dispersion, Reinforced-Edge Retention for Structural Fastening Integrity
- Universal Compatibility:Compatible with all standard structural fastening systems, these square flat washers perform equivalently to round washers while providing enhanced surface contact when used with bolts and anchor assemblies.
HLM Flush Mount Fishing Rod Holder, Stainless Steel ,Offshore-Rated Fflush Rod Socket
$0.01HLM INDUSTRY Flush Mount Fishing Rod Holder
Heavy-duty stainless steel construction with self-draining socket, designed for sportfishing boats and offshore cruisers. Corrosion-resistant and tangle-free for saltwater angling.
- Material:stainless steel
- Technique Procedure:Cast
- Finish: Polished
- High-Quality Stainless Steel: Built with corrosion-resistant stainless steel, making it suitable for marine and outdoor use.