HLM 381-SY Scrap Handling Blocks, Single Sheave Design | WLL:15-40T | Weight: 285-815 | Sheave Diameter:16-24in
$0.01HLM INDUSTRY 381-SY Scrap Handling Blocks
Heavy-gauge alloy steel construction with reinforced sheave design, engineered for extreme debris handling in scrap yards and demolition sites. Impact-resistant and sealed against particulate ingress for maximum durability.
- All single point shank hooks are genuine HLM, forged alloy steel,Quenched and Tempered, and have the patented QUIC-CHECK® markings.
- WLL:15-40T
- Weight: 285-815
- Sheave Diameter:16-24in
- Durable – Allows longer continuous duty cycle.
- Can be used with magnet and drop ball.
- Single sheave design.
- Dual action hook (Swings and Rotates)
- Utilizes McKissick® Roll-Forged sheaves with flame hardened grooves.
- Furnished standard with Bronze Bushed Sheaves.
- Optional Tapered Roller Bearings.
- All sizes are RFID EQUIPPED.
HLM 4-3/4″ G-2140E Alloy EASY-LOC Anchor Shackle 5″ – Hot Dip Galvanized | G-2140E – 200 Ton
$0.01HLM INDUSTRY G2140E Alloy Shackle
Crosby G-2140E Alloy Easy-Loc Anchor Shackles meet or exceed all requirements of ASME B30.26 including identification, ductility , design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26. Equipped with the Easy-Loc V2 shackle bolt which reduces install/release times by up to 90%.
Features:
- Approved for use at -40° C (-40° F) to 204° C (400° F)
- Forged Alloy Steel – Quenched and Tempered, with alloy pins
- Working Load Limit permanently shown on every shackle
- Meets the performance requirements of Federal Specification RR-C 271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor
Specifications:
- Size (Shackle Body Thickness): 5″
- Throat Opening (Width Between Ears): 8.50″
- Throat Depth: 18.50″
- Pin Size: 5.00″
- Pin Type: Crosby Easy-Loc V2 Tm Pin
- Finish: Hot Dip Galvanized
- Material: Alloy Steel Body & Alloy Steel Pin
- Working Load Limit: 250.00 tons (500,000 lbs)
HLM 416 Single Sheave with Hook, Hook Fitting | Forged Steel Swivel Fittings | WLL:2-12t
$0.01HLM INDUSTRY Single Sheave with Hook
Heavy-duty forged steel construction with integrated sheave for efficient vertical load control in tight industrial and marine spaces.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings.
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave grooves suited for a range of wire line diameters.
- Meets or exceeds all requirements of ASME B30.26 including identification ductility, design factor, proof load and temperature requirements.
Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability,not addressed by ASME B30.26.
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- “Lebus General Purpose” snatch blocks (with shackle or hook) feature an easy-to-open bolt design. The retaining bolt is released by rottating the fitting assembl , no tools required.
- HLM’s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for your application.
HLM 418 Light Champion Snatch Blocks, WLLL:15-30T | Latch-equipped | Wire Rope Size:3/4-7/8 to 1—1-1/4
$0.01HLM INDUSTRY 418 Light Champion Snatch Blocks
Meets or exceeds all requirements of ASME B30.26 including identification ductility, desian factor, proof load and temperature requirements.Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability, not addressed by ASME B30.26.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave qrooves suited for a range of wire line diameters.
- All blocks are RFID EQUIPPED
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- HLM ‘s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for yourapplication.
HLM 420 Snatch Block with Hook Fitting , WLLL:15-30T | Latch-equipped | Bearing Code: BB/RB
$0.01HLM INDUSTRY 420 Snatch Block with Hook Fitting
Meets or exceeds all requirements of ASME B30.26 including identification ductility, desian factor, proof load and temperature requirements.Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability, not addressed by ASME B30.26.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave qrooves suited for a range of wire line diameters.
- All blocks are RFID EQUIPPED
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- HLM ‘s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for yourapplication.
HLM 430 Super Champion Snatch Blocks, Wire Rope Size:3/4-7/8 to 1—1-1/4 | WLLL:15-30T | Sheave Diameter:8-24
$0.01HLM INDUSTRY 430 Super Champion Snatch Blocks
Meets or exceeds all requirements of ASME B30.26 including identification ductility, desian factor, proof load and temperature requirements.Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability, not addressed by ASME B30.26.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave qrooves suited for a range of wire line diameters.
- All blocks are RFID EQUIPPED
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- HLM ‘s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for yourapplication.
HLM 434 High Capacity Alloy Snatch Blocks, Wire Rope Size:3/4-7/8 to 1—1-1/4 | Latch-equipped | Multi-Groove Sheaves for Varied Wire Diameters
$0.01HLM INDUSTRY 434 High Capacity Alloy Snatch Blocks
Meets or exceeds all requirements of ASME B30.26 including identification ductility, desian factor, proof load and temperature requirements.Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability, not addressed by ASME B30.26.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave qrooves suited for a range of wire line diameters.
- All blocks are RFID EQUIPPED
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- HLM ‘s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for yourapplication.
HLM 443 Lay Down Blocks, Weight: 12-175lb | Sheave Diameter: 4-1/2 to 6 | WLL: 1/4-1/2
$0.01HLM INDUSTRY 443 Lay Down Blocks
Low-profile forged construction with reinforced side plates for horizontal load handling in space-constrained marine and industrial applications.
- Weight: 12-175lb
- Sheave Diameter: 4-1/2 to 6
- WLL: 1/4-1/2
- All steel construction, steel sheaves mounted on antifriction bearings, grooved for maximum of 3/4″ Wireline.
- Used to lay down drill pipe.
- Hook made to fit into end of drill pipe, handy dead end becket for returning block – hooks have handle fordisengagement.
HLM 4×4 Screw Jack,Heavy-duty Structural Support for Permanent | Weight:12lb | Load Capacity: 15,000 lb
$0.01HLM INDUSTRY 4×4 Screw Jack
A versatile adjustable support system designed for use with standard 4×4 lumber, ideal for both temporary and permanent structural applications across residential, commercial, and emergency shoring projects.
- Material:Steel
- Finish: Galvanized or Powder Coated
- Load Capacity: 15,000 lb
- Lumber Compatibility: Standard/nominal/dressed 4×4 lumber (3.5″ sq.), cut square (true-cut lumber not recommended)
- Height Range: 14.25″ min. (fully retracted), 6″ max. adjustment via 1.25″ diameter Acme screw
- Operation:Manual adjustment with U-shaped handle (1,800 lb. lifting capacity). Increased leverage (4,000 lb. capacity) using 2x4x6’ lumber as a cheater bar
- Maintenance: Pre-greased screw for smooth operation and rust prevention
- Installation: Base plate with 4x 5/16″ holes for secure anchoring
- Critical: Always anchor to a solid foundation and brace laterally
- Safety Lock: 6mm Allen wrench-tightened lock nut to prevent unintended adjustments
- Performance Benefits: Dual-Point Load Distribution, Rigid Interlock Stability for High-Frequency Formwork Cycling
- 4×4 Screw Jack is constructed from high carbon steel and designed for long-lasting durability.
HLM 50-5000KGS Light Weight Admiralty Anchor Marine Anchor Boat Anchor Baldt Single Fluke Admiralty Stock Type JIS Stockless Anchor
$0.01HLM INDUSTRY – Admiralty Anchor
The Admiralty anchor (a stock anchor) has a central shank with a shackle for attaching the rode (ship’s anchor line). At the shank’s base, two arms hold triangular flukes. A horizontal stock crosses the shackle end at 90° to the arms.
When dropped, it lands on its arms with the stock flat on the seabed. As tension pulls the rode, the stock digs in, rotating the anchor until a fluke catches and embeds, securing the vessel.
1. Material: Casting steel
2. Weight: 500kg-8000kg
3. Certificate: CCS, ABS, LR, GL, NK, RS, DNV, KR, BV, RINA
4. Delivery: 30-60 days or earlier after confirm order
5. Port of loading: Qingdao, shanghai
6. Packing details: In bulk
7. Mainly used: Boat and sailing
8. Trade terms: FOB, CFR, CIF
9. Minimum order quantity: one piece
10. Surface treatment: Black bitumen paint, anti-rusting paint or customized
HLM 6 X 25(Fi)+IWRC Steel Wire Rope, Extra lmproved Plow Steel | Maximizes Radial Strength with Ultra-Dense Wire Configuration
$0.01HLM INDUSTRY 6×25(FI)+IWRC Extra Improved Plow Steel Wire Rope
6×25(FI)+IWRC Extra Improved Plow Steel Wire Rope delivering unmatched radial stability and fatigue resistance for ultra-severe sheave applications.
- Material: Extra lmproved Plow Steel
- Type of Core: IWRC
- Surface Treatment:Galvanized/Uncoated
- Weight:0.116-3.500lb
- Diameter Range: Min:1/4-1 3/8in Max:0.265-1.444in
- Construction: 6×25(Fi)+IWRC
HLM 6 X 25(Fi)+IWRC Steel Wire Rope, lmproved Plow Steel | Enhances Load Distribution with Compacted Strand Architecture
$0.01HLM INDUSTRY 6×25(FI)+IWRC Improved Plow Steel Wire Rope
6×25(FI)+IWRC Improved Plow Steel Wire Rope delivering exceptional load distribution and crush resistance for severe-duty sheave applications.
- Material: lmproved Plow Steel
- Type of Core: IWRC
- Surface Treatment:Galvanized/Uncoated
- Weight:0.116-3.500lb
- Diameter Range: Min:1/4-1 3/8in Max:0.265-1.444in
- Construction: 6×25(Fi)+IWRC