HLM HG-228 Jaw and Jaw Turnbuckle, Hot Dip galvanized steel | Proof Load: 2.5×WLL | Ultimate Load: 5×WLL
$0.01HLM INDUSTRY HG-228 Jaw and Jaw Turnbuckle
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Hot Dip galvanized steel.
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Forged jaw ends are fitted with bolts and nuts for 1/4″ through 5/8″, and pins and cotters on 3/4″ through 2-3/4”sizes.
- Modified UNJ thread on end fittings for improved fatigue propertieBody has UNC threads.
- Fatigue Rated.
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature reguirements. lmportantly, these turnbuckles meet other critical performance reguirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
HLM HG-4060 Lock Nuts, Drop Forged Steel | Complete assembly is self-colored
$0.01HLM INDUSTRY HG-4060 Lock Nuts
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Complete assembly is self-colored.
- Reference American Welding Society Specifications for proper welding procedures
- Meets the performance requirements of Federal Specifications FF- T-791b, Type 1 Form 1 – CLASS 3, and ASTM F-1145, except for those provisions required of the contractor.
HLM HG-4061 Lock Nuts, Drop Forged Steel | Complete assembly is self-colored
$0.01HLM INDUSTRY HG-4061 Lock Nuts
- End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
- Complete assembly is self-colored.
- Reference American Welding Society Specifications for proper welding procedures
- Meets the performance requirements of Federal Specifications FF- T-791b, Type 1 Form 1 – CLASS 3, and ASTM F-1145, except for those provisions required of the contractor.
HLM High Chair with Plastic Tipped, Height: 2″-6″ | Weight: 0.21-0.47lbs | Secure Spacing and Corrosion Protection for Concrete Reinforcement
$0.01HLM INDUSTRY High Chair with Plastic Tipped
High Chair with Plastic Tipped supports are utilized in commercial concrete construction to provide precise elevation for reinforcing steel in applications such as elevated decks, footings, metal-deck slabs, bridge decks, and related structural components.
- Height: 2″-6″
- Weight: 0.21-0.47lbs
- Material Options: Bright basic, plastic-protected, epoxy-coated, or galvanized wire.
- Height Range: Standard 2″–6″ (¼” increments), custom up to 15″ (bracing required >12″).
- Application: Supports rebar/mesh in flat slabs, tilt-up walls, elevated slabs, and precast panels.
- Customization: Plain and plastic-tipped variants available to order.
HLM High Holding Power (HHP) Danforth Anchor Cast Steel Danforth Type High Holding Power Anchor
$0.01HLM INDUSTRY – HHP Danforth Anchor
Cast Steel Danforth Type High Holding Power Anchor
- HHP Danforth Anchor
- Weight: 20kg to 25000kg
- Material: Q235, stainless steel 316L as an option;
- Finishing: black painting, hot dip galvanized
- Applications: yacht anchor, boat anchor
- Certificate: DNV-GL, BV, LRS, ABS, RINA, IRS, RS, CCS, KR, NK etc
HLM High Holding Power (HHP) N Type Anchor JYN-Type HHP Balanced Anchor is designed for balance treated.
$0.01HLM INDUSTRY –JYN-Type HHP Balanced Anchor
N type anchor is one type of stockless high holding power anchor. It is used as a bow anchor when sailing. Its weight can be lighter by 25% than standard weight. N-type HHP anchor is designed to fit into small anchor pockets on modern ships and the hollow flukes are welded from two plates to create strong anchoring performance under various circumstances. This construction gives the anchor a large resistance against bending forces. The applications of the anchor are large yachts, cruise vessels and container vessel ships.
- HHP N Type Anchor
- Weight: 60KG to 28875KG
- Material: ZG230-45CH, Q345C, stainless steel 316L
- Finishing: black painting, hot dip galvanized
- Certificate: BV, ABS, DNV,GL, LRS, RINA, RS, IRS, CCS, KR, NK etc
HLM High Load Capacity Flat Webbing Sling Making of 100% high strength polyester webbing accorind to BSEN1492-1 Standard.
$0.01HLM INDUSTRY – Flat Webbing Sling
Flat Webbing Sling for heavy duty lifting with reinforced eyes at both ends. Making of 100% high strength polyester webbing accorind to BSEN1492-1 Standard. Support customize to meet different usages and needs.
- High tenacity polyester
- Reinforced lifting Eyes
- Low elongation
- Each black stripe is equal to 1ton capacity
- Manufactured in various lengths
- Extra durable WLL tag with clear protective sleeve fitted
- Factor of Safety 7.1
- Flat Webbing Slings comply to SANS94-1, EN1492-1 and AS1353
HLM High Quality Custom Made Goat Leather Rubber Welding protection Gloves
$0.01HLM INDUSTRY – Welding Gloves
Designed for the professional welder, Heavy duty premium split leather, Heat-resistant Kevlar sewn, Fully reinforced and cross stitched palm, Full jersey lining and welted seams
• Foundry work
• Welding and Steel Fabrication
• Smelting & High Heat applications
HLM High Quality Stainless Steel 304/316 JIS Type Dee Shackle Rigging Hardware JIS Type Forged D Shackle
$0.01HLM INDUSTRY – 304/316 Stainless Steel JIS Type D Shackle
304/316 stainless steel dee shackle meets performance requirements of Federal specifications RR-C-271D.
Traceability code, capacity, brand name and WLL embossed.
Construction: Forged quanched and tempered, with alloy pin.
Material: Forged carbon steel with alloy pin.
Finish: Hot dip galvanized.
Proof load: Tested at 2 times of Working Load Limit.
Safety factor: 6: 1.
Fatigue: Tested at 1.5 times of Working Load Limit.
HLM High Strength Heavy Duty Bar Chair, Clip on Plastic Spacer SP0653B, Thickness of the protective layer: 50mm/65mm | For High-Frequency Vibration Damping and Multi-Surface Compatibilit
$0.01HLM INDUSTRY Heavy Duty Plastic Bar Chair for Rebar
Engineered for heavy-duty rebar support, our high-strength Plastic Bar Chairs for Rebar ensure precise elevation and consistent concrete cover in industrial slab and beam systems. Available in multiple load-rated heights to meet stringent design specifications, these durable chairs are molded from reinforced polymers for extreme-condition reliability. Custom configurations can also be produced to accommodate specialized structural and seismic requirements.
- Thickness of the protective layer:50mm/65mm
- The size for tie bar: 8-18mm
- Heavy-Duty Load Support – Ensures stable rebar elevation and accurate concrete cover under extreme loads in industrial slab and beam systems.
- Reinforced Polymer Integrity – High-strength construction maintains structural integrity under dynamic pouring and vibration in heavy formwork.
- Harsh Environment Resistance – UV-resistant and chemical-proof material ensures longevity in demanding job-site conditions.
- Multi-Height Compliance – Designed to meet varying cover specifications with minimal adjustment for efficient project scaling.
HLM High Strength PP/PE Plastic Spacer/Platform Spacer for Steel SP0702B, Thickness of the protective layer: 70mm/80mm | For Multi-Surface Adaptability and Chemical Resistance
$0.01HLM INDUSTRY Plastic Rebar Chair Spacers
Engineered for rapid steel rebar fastening, our spring-action Plastic Clip Spacer for Steel ensures instant snap-on attachment and reliable corrosion isolation in structural and formwork systems. Available in multiple sizes to fit various rebar diameters and profiles, these durable clips are molded from glass-reinforced nylon for mechanical resilience in harsh job-site conditions. Custom designs can also be produced to meet specialized connection and seismic requirements.
- Thickness of the protective layer: 70mm/80mm
- The size for tie bar: 8-16mm
- Instant Snap-On Fastening – Ensures quick and secure attachment to steel rebars without tools, reducing installation time and labor costs.
- Corrosion Isolation Barrier – Nylon construction prevents metal-to-metal contact, eliminating galvanic corrosion in humid and chemical environments.
- High-Impact Resistance – Glass-reinforced material maintains clip integrity under vibration and dynamic loads on construction sites.
- Multi-Size Adaptability – Compatible with various rebar diameters and profiles for versatile structural and formwork applications.
HLM Hot Forged Stainless Steel 304/316 Marine JIS Type Screw Pin Bow Shackle Japanese Bow Shape Shackle
$0.01HLM INDUSTRY – Us G209 BOw Anchor Shackle
304/316 stainless steel dee shackle meets performance requirements of Federal specifications RR-C-271D.
Traceability code, capacity, brand name and WLL embossed.
Construction: Forged quanched and tempered, with alloy pin.
Material: Forged carbon steel with alloy pin.
Finish: Hot dip galvanized.
Proof load: Tested at 2 times of Working Load Limit.
Safety factor: 6: 1.
Fatigue: Tested at 1.5 times of Working Load Limit.