HLM DIN582 Eye Nut , Stainless Steel | WT:0.019-0.569kgs | Size: M6-M24
$0.01HLM INDUSTRY DIN582 Eye Nut
Precision-Machined from Marine-Grade AISI 316L for Threaded Load Suspension and Saltwater Corrosion Resistance in Offshore and Industrial Installations.
- Material:grade 316 or 304 stainless steel
- WT:0.019-0.569kgs
- Size: M6-M24
- Technique Procedure:Cast
- Finish: Polished
- High-Quality Stainless Steel: Built with corrosion-resistant 304/316 stainless steel, making it suitable for marine and outdoor use.
HLM Double Flared Coil Loop Insert, Bolt Diameter: 1″ to 1-1/2″ | SWL Tension: 13,500 lbs | Dual-Expansion Anchor for Critical Loads
$0.01HLM INDUSTRY Double Flared Coil Loop Insert
The insert’s open-loop design creates a clearance zone between coils, enabling it to bridge across reinforcing steel or prestressing tendons.
- Bolt Diameter: 1″ to 1-1/2″
- SWL Tension: 13,500 lbs
- Enhanced Load Capacity: The safe working load of the Double Flared Coil Loop Insert is significantly higher than that of the single flared version.
- Structural Implementation: This improvement is achieved by welding a second loop to the same coil.
- Material Reinforcement Effect: The additional loop doubles the total cross-sectional area of steel embedded in the concrete.
- Mechanical Performance Optimization: It simultaneously expands the shear cone area in the concrete, further enhancing anchoring reliability.
HLM Double Flared Criss Cross Coil Loop Insert, Bolt Diameter: 1″ to 1-1/2″ | SWL Tension: 13,500 lbs | Cross-Braced Dual-Expansion Anchor for Extreme Dynamic Loads
$0.01HLM INDUSTRY Double Flared Criss Cross Coil Loop Insert
Compact Four-Strut Design Delivers High Strength and Versatility, Especially in Low-Strength Concrete Applications.
- Bolt Diameter: 1″ to 1-1/2″
- SWL Tension: 13,500 lbs
- Identical Safe Working Load: The Double Flared Coil Loop Insert exhibits the exact same safe working load as the Double Flared Coil Loop.
- Structural Design Limitation: Its crisscross configuration prevents the insert from straddling reinforcing steel or prestressing strands.
HLM Double Straight Loop Coil Insert, Bolt Diameter:3/4″-1″ | SWL Tension: 2,250-3,750 lbs | Ultimate Redundant Loop Connection System
$0.01HLM INDUSTRY Double Straight Loop Coil Insert
Double Straight Loop Coil Insert combines twin welded wire loops and a precision-machined steel ferrule with dual-end threading, engineered to deliver redundant load paths and exceptional safety for critical lifting applications.
- Bolt Diameter: 3/4″-1″
- SWL Tension:2,250-3,750 lbs
- Design & Efficacy: Double Straight Loop Inserts offer a dual-loop design for enhanced safety and load redundancy in precast handling.
- Structure & Manufacturing: They combine two welded loops with a steel ferrule, drilled and tapped at both ends for balanced connections.
- Primary Application: Ideal for critical lifting and anchoring of large precast elements in high-stress.
HLM Double Threaded Stud, For Dual-End Tensioning and Cross-Thread Compatibility
$0.01HLM INDUSTRY Double Threaded Stud
Double Threaded Studs provide superior bilateral tensioning with their symmetrical threaded design, securing firmly to pre-tapped ports or through-holes to anchor flanges, couplings, or modular frames for balanced load transfer in both mechanical and structural applications.
- Symmetrical Tensioning: Double-ended threads enable balanced load transfer and simultaneous fastening from both sides without alignment issues.
- Cross-Thread Compatibility: Standardized threads ensure seamless integration with nuts, couplings, and pre-tapped components across systems.
- Multi-Assembly Versatility: Secures flanges, machinery mounts, and structural modules in mechanical, hydraulic, and construction applications.
- Quick Installation: Pre-threaded design eliminates onsite tapping, reducing assembly time and tool requirements.
- High-Strength Durability: Forged steel construction withstands high cyclic loads and vibration in dynamic environments.
HLM Double Wire Rope Loop Box (SWL), Length: 160×50×20mm | WLL:12.2KN | For Enhanced Dual-Loop Stability and Dynamic Load Redundancy
$0.01HLM INDUSTRY Double Wire Rope Loop Box
HLM Double Wire Rope Loop Boxes integrate two high-strength steel loops secured with compression sleeves within a reinforced steel box, enabling redundant tool-free installation via tear-off tape for secure and efficient connection of heavy precast elements to structural frames.
- Length: 160×50×20mm
- WLL:12.2KN
- 7×19 High Strength 1770Mpa Galvanized Wire Rope.
- Galvanized 80G Steel Plate.
- Galvanized Sleeve.
- Minimum Broken Strength 48.8Kn
HLM DR Anchor, For Deep Embedment Anchoring and High-Load Reinforcement
$0.01HLM INDUSTRY DR Anchor
Used for lifting concrete formwork, a Lifting Pin Eye Anchor is inserted into wet concrete. Its tapered end ensures a secure hold once the concrete sets, providing a sturdy load-bearing connection point via its exposed eyelet.
- Deep Embedment Security – Ensures robust anchoring within concrete for maximum load transfer and structural stability.
- Expansion-Controlled Grip – Mechanical sleeve design prevents pull-out under dynamic or seismic loads.
- Adaptable Installation – Compatible with varying embedment depths and concrete grades for versatile foundation applications.
HLM Duplex Wire Rope Clip, Stainless Steel | Size: 2-10mm
$0.01HLM INDUSTRY Stainless Steel Duplex Wire Rope Clip
Type 316 Stainless Steel – Premium marine-grade material for superior corrosion resistance
High Tensile Strength – Engineered for heavy-duty rigging and load-bearing applications
Dual Fastening Design – Creates secure eye splices or connects two wire ropes for extended length
Corrosion-Resistant – Ideal for harsh environments, including marine and industrial use
Multi-Purpose Use – Suitable for rigging, towing, wire canopy structures and more
HLM Durable HDPE/PP Pro Insert Foot: Secure & Stable Support for Heavy Loads
$0.01HLM INDUSTRY – Pro Insert Foot
Our Pro Insert Foot is engineered with high-performance HDPE or PP material, offering exceptional durability and chemical resistance. Designed to absorb shock, reduce noise, and prevent surface damage, these inserts ensure long-term stability for industrial equipment, furniture, and machinery. Ideal for heavy-duty applications, they are CE-certified and available for bulk OEM orders.
Primary Material: HDPE / PP
Core Function: Anti-slip, Shock Absorption, Floor Protection, Load Distribution
Key Advantages: High Durability, Chemical Inertia, Easy Installation
Main Certification: CE
Service Support: OEM Customization | Bulk Discounts | Free Samples
HLM Electric Chain Hoist | Sophisticated Powered Lifting Technology for Superyacht & Commercial Rigging Systems
$0.01HLM INDUSTRY Electric Chain Hoist
- High-Efficiency Motor Drive – Premium pure copper motor provides strong power, stable output and low heat generation for continuous high-frequency lifting work
- Dual Safety Brake System – Instant power-off braking and mechanical braking dual protection, preventing cargo falling and ensuring full-operation safety
- Heat-Treated Chain Structure – High-strength alloy load chain with wear-resistant treatment, excellent toughness and long service life under repeated heavy loads
- Multi-Safety Protection Design – Built-in overload protection and upper/lower limit stop device to avoid equipment damage and operational risks
- High Working Efficiency – Motorized automatic lifting replaces manual operation, greatly improving hoisting efficiency and reducing labor costs
- Wide Application Scenarios – Suitable for factory workshop, marine terminal, warehouse, construction and commercial rigging heavy-load lifting tasks
HLM electro galvanized paper strip nails available in hardened steel bright finish engineered for high speed framing sheathing with automated nailing efficiency
$0.01HLM INDUSTRY – Paper Strip Nails
for High-Speed Automated Nailing and Efficient Construction. Manufactured from Hardened Steel with Electro-Galvanized or Bright Finishes. Ideal for Framing, Sheathing, and Pallet Manufacturing.
• Hardened Steel Construction
• Electro-Galvanized or Bright Finish for Basic Corrosion Resistance
• Strip Design for Continuous Loading in Pneumatic Nail Guns
• Chisel Point for Rapid Penetration in Wood and Engineered Lumber
• Compatible with All Standard Strip Nailers
• Reduces Downtime with Tangle-Free Strip Packaging
• Essential for High-Volume Framing, Roofing, and Packaging Industries
HLM Elephant Foot Ferrule (SEF), Length: 45-125mm | WLL: 0.4-4.0T | Heavy-Duty Corrosion-Resistant Anchoring for Structural Concrete Applications
$0.01HLM INDUSTRY Elephant Foot Ferrule
Engineered for durability in harsh environments, these ferrules are reliable for civil infrastructure and high-rise construction.
- Length: 45-125mm
- WLL: 0.4-4.0T
- Electro-galvansied and Hot-dip Galcanised is Available.
- Q235, 45#and Stainless Steel is Available.
- Length Can Be Customized.
- Safety Factor: 3.