HLM 4-3/4″ G-2140E Alloy EASY-LOC Anchor Shackle 5″ – Hot Dip Galvanized | G-2140E – 200 Ton
$0.01HLM INDUSTRY G2140E Alloy Shackle
Crosby G-2140E Alloy Easy-Loc Anchor Shackles meet or exceed all requirements of ASME B30.26 including identification, ductility , design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26. Equipped with the Easy-Loc V2 shackle bolt which reduces install/release times by up to 90%.
Features:
- Approved for use at -40° C (-40° F) to 204° C (400° F)
- Forged Alloy Steel – Quenched and Tempered, with alloy pins
- Working Load Limit permanently shown on every shackle
- Meets the performance requirements of Federal Specification RR-C 271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor
Specifications:
- Size (Shackle Body Thickness): 5″
- Throat Opening (Width Between Ears): 8.50″
- Throat Depth: 18.50″
- Pin Size: 5.00″
- Pin Type: Crosby Easy-Loc V2 Tm Pin
- Finish: Hot Dip Galvanized
- Material: Alloy Steel Body & Alloy Steel Pin
- Working Load Limit: 250.00 tons (500,000 lbs)
HLM Chain Swivels | Heavy‑Duty Rotation Performance for Marine Anchoring Systems
$0.01HLM INDUSTRY -Chain Swivels
Heavy‑duty chain swivels are an essential component widely used by boaters and marine operators across North America. Designed to eliminate chain twisting and tangling during anchoring operations, they offer smooth free rotation under heavy loads and maintain reliable performance in harsh salt‑water environments. Suited for anchoring in varied seabed conditions, these swivels work well for yachts, workboats and commercial vessels. It is a highly‑recommended hardware for complete marine anchoring assemblies.
- Robust Swivel Construction – Precision‑machined rotating joints for tangle‑free chain movement and superior load‑bearing capacity
- High‑Strength Steel Material – Available in hot‑dip galvanized steel and 316 stainless steel for diverse marine environment demands
- Certified Marine Grade – Meets mainstream marine industry standards for anchoring and mooring system applications
HLM Clevis Pin | Precision Machined Fastening Excellence for Superyacht & Structural Rigging Systems
$0.01HLM INDUSTRY Clevis Pin
- Precision Machined Construction – Strict dimensional tolerance and smooth finished surface ensure tight, stable and gap-free assembly
- High Shear Strength – Premium steel and stainless steel material delivers outstanding load-bearing and anti-deformation performance
- Dual Locking Security – Standard cotter pin hole design enables firm locking, avoiding accidental detachment during operation
- Superior Corrosion Resistance – Galvanized or stainless steel finish provides long-term durability for harsh marine and outdoor environments
- Versatile Application – Ideal for marine rigging, mechanical equipment, architectural structures and industrial movable joint
HLM Crosby 5/8″ 3.25 Ton S209T Black Theatrical Shackle 7/8″ Theatrical Screw Pin Anchor Shackle – 8-1/2 Ton WLL – Painted
$0.01HLM INDUSTRY GS-209T Shackle
Crosby S-209T Theatrical Black Screw Pin Anchor Shackles meet or exceed all requirements of ASME B30.26 including identification, ductility , design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26. Crosby Theatrical Shackles are powder coated flat black to help hide the rigging from the audience.
Features:
- Flat black baked on powder coated finish
- Forged Carbon Steel – Quenched and Tempered, with alloy pins
- Working Load Limit permanently shown on every shackle
- Approved for use at -40° C (-40° F) to 204° C (400° F)
Specifications:
- Size (Shackle Body Thickness): 3/8″
- Throat Opening (Width Between Ears): 0.66″
- Throat Depth: 1.44″
- Pin Size: 0.44″
- Pin Type: Screw Pin
- Finish: Painted
- Material: Carbon Steel Body & Alloy Steel Pin
- Working Load Limit: 1.00 tons (2000 lbs)
- Meets the performance requirements of Federal Specification RR-C 271G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor
HLM Crosby G-209A Alloy Screw Pin Anchor Shackle 5/8″ -12.5 Ton Working Load Limit | Forged Steel | Hot-Dip Galvanized
$0.01HLM INDUSTRY G209A Alloy Screw PIN Shackle
G-209A Alloy Screw Pin Anchor Shackles meet or exceed all requirements of ASME B30.26 including identification, ductility , design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
Features:
- Approved for use at -40° C (-40° F) to 204° C (400° F)
- Forged Alloy Steel – Quenched and Tempered, with alloy pins
- Working Load Limit permanently shown on every shackle
- Meets the performance requirements of Federal Specification RR-C 271G, Type IVA, Grade B, Class 2, except for those provisions required of the contractor
Specifications:
- Size (Shackle Body Thickness): 5/8″
- Throat Opening (Width Between Ears): 1.06″
- Throat Depth: 2.38″
- Pin Size: 0.75″
- Pin Type: Screw Pin
- Finish: Hot Dip Galvanized
- Material: Alloy Steel Body & Alloy Steel Pin
- Working Load Limit: 5.00 tons (11000 lbs)
HLM G-209/S-209 Carbon Screw Pin Anchor Shackle, 1/3t- 55t capacity｜Marine Grade｜Hot Dip Galvanized
$0.01HLM INDUSTRY G209/S209 Shackle
Capacities 1/3 thru 55 metric tons, grade 6.
Forged – Quenched and Tempered, with alloy pins.
Working Load Limit and grade “6″ permanently shown on every shackle.
Hot Dip galvanized or self colored.
Sizes 3/8 inch and below are mechanically galvanized.
Fatigue rated.
Shackles can be furnished proof tested with certification to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order, charges will apply.
Approved for use at -40°C (-40°F) to 204°C (400°F).
All G-209/S-209 shackles meet Charpy V-notch impact requirements of 42 Joules (31 ft·lbf) avg. at -20°C (-4°F) upon special request.
Meets or exceeds all requirements of ASME B30.26.
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
HLM G-210/S-210 Round pin chain Shackle – Hot Dip Galvanized 5/16″ G-210 Screw Pin Chain Shackle – 3/4 Ton
$0.01HLM INDUSTRY G210/S210 Shackle
HLM G-213/S-213 Round pin Anchor Shackle, Galvanized, 3-1/4 Ton Working Load Limit, 5/8 inch Size
$0.01HLM INDUSTRY G213/S213 Shackle
- Forged, Quenched & Tempered, with alloy pins
- Working Load Limit permanently shown on every shackle
- Hot-dip galvanized
- Sizes 3/8″ and below are mechanically galvanized
- Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification; charges for proof testing and certification available when requested at the time of order
- Shackles are Quenched & Tempered and can meet DNV impact requirements of 42 Joules (31 ft-Ib) at -20° C (-4° F)
- G-213 Round pin anchor shackles meet the performance requirements of Federal Specification RR-C-271H, Type IVA, Grade A, Class 1, except for those provisions required of the contractor
HLM G-2130/S-2130 Bolt Type Anchor Shackle, Crosby 3/16″ Bolt Type Galvanized Safety Shackles for Secure Lifting & Rigging
$0.01HLM INDUSTRY G2130/S2130 Shackle
- Capacities 1/3 thru 150 metric tons, grade 6.
- Working Load Limit and grade “6” permanently shown on every shackle.
- Forged – Quenched and Tempered, with alloy pins.
- Hot Dip galvanized or Self Colored. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
- Fatigue rated (1/3t – 55t).
- Shackles 25t and larger are RFID EQUIPPED.
- Approved for use at -40°C (-40°F) to 204°C (400°F).
- Meets or exceeds all requirements of ASME B30.26.
- Shackles 85 metric tons and larger are individually proof tested to 2.0 times the working load limit.
- Shackles 120 metric tons and larger are proof tested, Magnetic Particle Inspected and provided with Serialized Pin and Bow.
- Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
- 3.1 Certification as standard available for charpy and statistical proof test only up to 25 tons to DNV2.7-1 and EN13889.
- Crosby 2t through 25t G2130 anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 42 joules (31 ft.-lbs.) min. ave. at -20°C (-4°F). The tests are conducted by Crosby and 3.1 test certification is available upon request.
- All other 2130 and all 2150 shackles can meet chary requirements of 42 joules (31 ft.-lbs) avg. at -20°C (-4°F) upon special request.
HLM G-2130A bolt type Shackle , Crosby 7/8″ 5/8″ G-2130A Grade 8 Alloy Bolt Type Anchor Shackle 6-1/2 Ton WLL
$0.01HLM INDUSTRY G2130A Shackle
- Forged alloy steel, Quenched & Tempered, with bow and bolt
- Meets or exceeds all requirements of Grade 8 shackles
- Working Load Limit permanently shown on every shackle
- Hot-dip galvanized
- Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load, and temperature requirements
- Importantly, G-2130A meet other critical performance requirements, including impact properties, and material traceability not addressed by ASME B30.26
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order (additional fees apply)
- Type Approval and certification in accordance with DNV 2.7-1 offshore containers
- Shackles are Quenched & Tempered and meet DNV impact requirements of 42 Joules (31 ft-Ib) at -40° C (-40° F)
- G-2130A Bolt Type Anchor shackles with thin head bolt – nut with cotter pin, meets the performance requirements of Federal Specification RR-C271H, Type IVA, Grade B, Class 3, except for those provisions required of the contractor
HLM G-2140/S-2140 Alloy Bolt Type Anchor Shackle , 3/8″ – Hot Dip Galvanized – 2t- 175t capacity
$0.01HLM INDUSTRY G2140/S2140 Alloy Shackle
Crosby G-2140 Alloy Bolt Type Anchor Shackles meet or exceed all requirements of ASME B30.26 including identification, ductility , design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
Features:
- Approved for use at -40° C (-40° F) to 204° C (400° F)
- Forged Alloy Steel – Quenched and Tempered, with alloy pins
- Working Load Limit permanently shown on every shackle
- Meets the performance requirements of Federal Specification RR-C 271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor
Specifications:
- Size (Shackle Body Thickness): 3/8″
- Throat Opening (Width Between Ears): 0.66″
- Throat Depth: 1.44″
- Pin Size: 0.44″
- Pin Type: Bolt, Nut, & Cotter
- Finish: Hot Dip Galvanized
- Material: Alloy Steel Body & Alloy Steel Pin
- Working Load Limit: 2.00 tons (4000 lbs)
HLM G-215/S-215 Round pin chain Shackle, 2,000 lb Working Load Limit, 21/32 in Wd Between Eyes, Carbon Steel
$0.01HLM INDUSTRY G215/S215 Shackle
- Capacities 1/2 through 35 metric tons.
- Forged – Quenched and Tempered, with alloy pins.
- Working Load Limit permanently shown on every shackle.
- Hot Dip galvanized or Self Colored.
- Fatigue rated.
- Shackles 25t and larger are RFID EQUIPPED.