HLM 680 Construction Block Bolt Only, Wireline Sizes: 3/8″ to 1-1/4” | Single-Sheave Blocks with Thimble Dead-Ends
$0.01HLM INDUSTRY 680 Construction Block Bolt Only
Complies with and surpasses ASME B30.26 standards for identification, ductility, design factor, proof load, and temperature resistance. Additionally, these blocks exceed the standard by meeting rigorous performance criteria such as fatigue resistance, impact strength, and full material traceability.
- Wide Range of products available.
- Capacity: 5 to 100 Tons- Larger models available.
- Sheave sizes: 6″ to 24” O.D.
- Wireline Sizes: 3/8″ to 1-1/4”
- Equipped with genuine HLM forged steel, Quenched and Tempered shackles that contain the patented QUIC-CHECK® markings.
- Design Factor of 4:1.
- All 680 Series Blocks are furnished standard with Bronze Bushings.
- All 680 blocks 16″ and larger, are furnished with McKissick Roll-Forged sheaves with flame hardened grooves
- Sheaves are lubricated through center pin, with a separate lube channel to each bearing.
- Single sheave blocks have thimble dead end.
- Manufactured by an iSO 9001 and APl Q1 Certified facilit
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. lmportantly, these blocks meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
OPTIONS AVAILABLE - Roller bearing sheaves
- Hanger and Bolt Only models available
- Third party testing with certificatio
- Galvanized finish- Most model
HLM 680 Construction Block with Hanger, Sheave sizes: 6″ to 24” O.D. | with Roll-Forged, Flame-Hardened Sheaves
$0.01HLM INDUSTRY 680 Construction Block with Hanger
Complies with and surpasses ASME B30.26 standards for identification, ductility, design factor, proof load, and temperature resistance. Additionally, these blocks exceed the standard by meeting rigorous performance criteria such as fatigue resistance, impact strength, and full material traceability.
- Wide Range of products available.
- Capacity: 5 to 100 Tons- Larger models available.
- Sheave sizes: 6″ to 24” O.D.
- Wireline Sizes: 3/8″ to 1-1/4”
- Equipped with genuine HLM forged steel, Quenched and Tempered shackles that contain the patented QUIC-CHECK® markings.
- Design Factor of 4:1.
- All 680 Series Blocks are furnished standard with Bronze Bushings.
- All 680 blocks 16″ and larger, are furnished with McKissick Roll-Forged sheaves with flame hardened grooves
- Sheaves are lubricated through center pin, with a separate lube channel to each bearing.
- Single sheave blocks have thimble dead end.
- Manufactured by an iSO 9001 and APl Q1 Certified facilit
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. lmportantly, these blocks meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
OPTIONS AVAILABLE - Roller bearing sheaves
- Hanger and Bolt Only models available
- Third party testing with certificatio
- Galvanized finish- Most model
HLM 680 Construction Block with Shackle, Capacity: 5-100T | 680 Series Blocks with Bronze Bushings (Standard)
$0.01HLM INDUSTRY 680 Construction Block with Shackle
Complies with and surpasses ASME B30.26 standards for identification, ductility, design factor, proof load, and temperature resistance. Additionally, these blocks exceed the standard by meeting rigorous performance criteria such as fatigue resistance, impact strength, and full material traceability.
- Wide Range of products available.
- Capacity: 5 to 100 Tons- Larger models available.
- Sheave sizes: 6″ to 24” O.D.
- Wireline Sizes: 3/8″ to 1-1/4”
- Equipped with genuine HLM forged steel, Quenched and Tempered shackles that contain the patented QUIC-CHECK® markings.
- Design Factor of 4:1.
- All 680 Series Blocks are furnished standard with Bronze Bushings.
- All 680 blocks 16″ and larger, are furnished with McKissick Roll-Forged sheaves with flame hardened grooves
- Sheaves are lubricated through center pin, with a separate lube channel to each bearing.
- Single sheave blocks have thimble dead end.
- Manufactured by an iSO 9001 and APl Q1 Certified facilit
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. lmportantly, these blocks meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
OPTIONS AVAILABLE - Roller bearing sheaves
- Hanger and Bolt Only models available
- Third party testing with certificatio
- Galvanized finish- Most model
HLM 6×19 – Fibre Core Wire Rope, DIN3060 | Delivers Lighter Weight Than Steel Core Constructions
$0.01HLM INDUSTRY 6×19 – Fibre Core Wire Rope
The 6×19 construction with fibre core (FC) represents an optimized balance between tensile strength and bending flexibility.This combination not only makes the cables robust and reliable in demanding conditions but also flexible enough for various applications.
- Material: Carbon Steel
- Surface Treatment:Galvanized
- Diameter Range:3-36mm
- Weight: 0.0311-4.48kg/m
- Construction: 6×19+FC
- Tensile Strength:1570/1770KN/mm²
- Specification:DIN3060
- Applications:heatrical Rigging Systems,Concert Lighting Truss Rigging,Architectural Curtain Wall Suspension,Production Line Material Handling,Temporary Exhibition Hall Ceiling Suspension
HLM 6×19 Seale – Fibre Core Wire Rope, lmproved Plow Steel | Optimized Flexibility & Extended Service Life for Dynamic Operations
$0.01HLM INDUSTRY 6×19 Seale – Fibre Core Wire Rope
The 6×19 Seale wire rope construction offers an optimal balance of strength and flexibility, featuring thicker outer wires for enhanced abrasion resistance. Available with either fibre core (FC) for maximum flexibility or independent wire rope core (IWRC) for added crush resistance, this construction delivers 15-20% higher breaking load than standard 6×19 ropes.
- Material: lmproved Plow Steel
- Surface Treatment:Galvanized/Uncoated
- Weight:0.105-3.180lb
- Diameter Range:1/4-1 3/8in
- Construction: 6×S(19)
HLM 6×19 Seale – IWRC Wire Rope, Extra lmproved Plow Steel | Optimizes Crush Resistance with High-Density Wire Architecture
$0.01HLM INDUSTRY 6×19 Seale +IWRC Extra Improved Plow Steel Wire Rope
6×19 Seale +IWRC Extra Improved Plow Steel Wire Rope delivering unparalleled wear resistance and crush performance for ultra-severe sheave applications.
- Material: Extra lmproved Plow Steel
- Type of Core: IWRC
- Surface Treatment:Galvanized/Uncoated
- Weight:0.116-3.500lb
- Diameter Range: Min:1/4-1 3/8in Max:0.265-1.444in
- Construction: 6×19 Seale +IWRC
HLM 6×19 Seale – IWRC Wire Rope, lmproved Plow Steel | Enhances Wear Resistance with Precision-Sealed Wire Configuration
$0.01HLM INDUSTRY 6×19 Seale +IWRC Improved Plow Steel Wire Rope
6×19 Seale +IWRC Improved Plow Steel Wire Rope delivering exceptional fatigue resistance and load stability for extreme-duty sheave applications.
- Material: lmproved Plow Steel
- Type of Core: IWRC
- Surface Treatment:Galvanized/Uncoated
- Weight:0.116-3.500lb
- Diameter Range: Min:1/4-1 3/8in Max:0.265-1.444in
- Construction: 6×19 Seale +IWRC
HLM 6X19+IWRC Steel Wire Rope, Extra lmproved Plow Steel | Maximizes Load Stability with Ultra-High Tensile Core Technology
$0.01HLM INDUSTRY 6×19+IWRC Extra Improved Plow Steel Wire Rope
6×19+IWRC Extra Improved Plow Steel Wire Rope delivering exceptional bending fatigue resistance and radial load capacity for extreme-duty sheave applications.
- Material: Extra lmproved Plow Steel
- Type of Core: IWRC
- Surface Treatment:Galvanized/Uncoated
- Weight:0.116-3.500lb
- Diameter Range: Min:1/4-1 3/8in Max:0.265-1.444in
- Construction: 6×19+IWRC
HLM 6X19+IWRC Steel Wire Rope, lmproved Plow Steel | Optimizes Fatigue Resistance with Hybrid Wire Architecture
$0.01HLM INDUSTRY 6×19+IWRC Improved Plow Steel Wire Rope
6×19+IWRC Improved Plow Steel Wire Rope delivering exceptional bending fatigue resistance and radial load capacity for extreme-duty sheave applications.
- Material: lmproved Plow Steel
- Type of Core: IWRC
- Surface Treatment:Galvanized/Uncoated
- Weight:0.116-3.500lb
- Diameter Range: Min:1/4-1 3/8in Max:0.265-1.444in
- Construction: 6×19+IWRC
HLM 6×37 – Fibre Core Wire Rope, lmproved Plow Steel | Optimizes Flexibility with Balanced Strand Construction
$0.01HLM INDUSTRY 6×37+FC Fiber Core Wire Rope
The 6×37 wire rope is a versatile cross-lay construction featuring a 1+6+12+18 wire arrangement, offering greater flexibility than 6×19 designs with lower rotation than 6×36 versions. While popular in continental Europe, the UK typically prefers 6×36 constructions. Available with either fiber core for general use or IWRC for heavy-duty applications up to 400°C, it’s commonly used in cranes, mining systems, and industrial lifting.
- Material: lmproved Plow Steel
- Type of Core: FC
- Surface Treatment:Galvanized/Uncoated
- Weight:0.105-3.180lb
- Diameter Range:1/4-1 3/8in
- Construction: 6×37+FC
HLM 6×37 Fibre Core Wire Rope, Hot-Dip Galvanized | Synthetic core reduces weight while maintaining flexibility
$0.01HLM INDUSTRY 6×37 Fibre Core Wire Rope
The 6×37 Fibre Core Wire Rope construction employs cross-lay technology for general engineering applications. This configuration is also available with IWRC (Independent Wire Rope Core) to enhance load-bearing capacity.
- Material: Carbon Steel
- Surface Treatment:Hot-Dip Galvanized
- Diameter Range:6-36mm
- Weight: 0.125-4.48kg/m
- Construction: 6×37+FC
- Min Breaking Strength: 18.8-600KN
- Specification:DIN3066
- Applications: shipbuilding, construction, mining, winches and agriculture.
HLM 6×37 IWRC Wire Rope, Hot-Dip Galvanized | Independent steel core provides 30% greater resistance to compressive forces
$0.01HLM INDUSTRY 6×37 IWRC Wire Rope
6×37 IWRC Core – Independent steel core provides 30% greater resistance to compressive forces. Heavy-Duty Performance – Maintains structural integrity under extreme loads
- Material: Carbon Steel
- Surface Treatment:Hot-Dip Galvanized
- Diameter Range:6-36mm
- Weight: 0.137-4.93kg/m
- Construction: 6×37+IWRC
- Tensile Strength:1570/1770KN/mm²
- Specification:DIN3066
- Applications: shipbuilding, construction, mining, winches and agriculture.