HLM Single Flared Coil Loop Insert, Bolt Diameter: 1/2″-1″ | SWL Tension: 3,000-8,000 lbs | Wide-Grip Anchor for Soft Materials
$0.01HLM INDUSTRY Single Flared Coil Loop Insert
Single Flared Coil Loop Insert maximizes load capacity by deepening and widening concrete embedment to engage more tensile strength, with optional B3 screw-on coils for recessed mounting via B30 cones.
- Bolt Diameter: 1/2″-1″
- SWL Tension: 3,000-8,000 lbs
- Available with an optional B3 Screw-on Coil for use with the B30 Screw-on Plastic Cone.
- Special lengths and flare shapes available on request.
- Increased depth and width of the concrete embedment to make effective use of the tensile strength of the mass of concrete embedded.
- Made with the loop end flared for greater anchorage in concrete.
HLM Single Pickup Inserts, Insert Height: 5-1/2″ to 9-1/2″ | SWL Tension: 3,750-8,100 lbs | Dedicated Single-Point Lifting Anchors for Standardized Precast Systems
$0.01HLM INDUSTRY Single Pickup Inserts
Single Pickup Insert enables direct vertical tensioning with centralized load transfer, exclusively compatible with swivel lifting plates for controlled modular precast handling in standardized production environments.
- Bolt Diameter: 5-1/2″ to 9-1/2″
- SWL Tension:3,750-8,100 lbs
- Lifting Compatibility: Designed for use with Swivel Lifting Plates (use with or without plates permitted).
- Spacing Requirement: Minimum spacing between inserts is twice the minimum corner distance.
HLM Single Tube Cap, For Axial Compression Resistance and End Protection
$0.01HLM INDUSTRY Single Tube Cap
Single Tube Caps deliver reliable debris exclusion and impact resistance with their high-visibility polymer construction, ensuring OSHA-compliant protection and durable barricade tube coverage in active construction zones.
- Complete Tube End Protection: Fully seals exposed barricade tube ends to prevent debris ingress and equipment damage. Snap-fit design ensures secure attachment without tools
- High-Visibility Safety System: Fluorescent yellow color enhances barricade visibility in low-light conditions. 360° recognition ensures clear identification from all angles
- Environmental Resistance: Weather-resistant polymer withstands UV exposure, moisture, and temperature fluctuations without cracking or fading
- Cost-Effective Solution: Reusable design reduces replacement costs. Durable construction survives multiple installation cycles
- Quick Identification Function: Color-coded design helps distinguish different barricade systems or safety zones at a glance
HLM Single Wire Rope Loop Box (SVL), Length: 160×50×20mm | WLL:6.1KN | For Reliable Loop Integrity and Flexural Fatigue Resistance
$0.01HLM INDUSTRY Single Wire Rope Loop Box
HLM Wire Rope Loop Boxes combine a high-strength steel loop secured with a compression sleeve and a steel box, enabling tool-free on-site installation via tear-off tape for quickly tying concrete elements to building frames.
- Length: 160×50×20mm
- WLL: 6.1KN
- 7×7 or 7×19 High Strength 1770Mpa Galvanized Wire Rope.
- Galvanized 80G Steel Plate.
- Galvanized Sleeve.
- Minimum Broken Strength 24.4Kn
HLM SL150M & SL150UNC Slide-Loc Lifting Point, Metric and Imperial Thread option, WLL Range from 500kg to 3200kg
$0.01HLM INDUSTRY SL150M & SL150UNC
The new Crosby SL-150 Slide-Loc™ is Crosby’s innovative alternative to standard eyebolt which provides features not found on standard lifting eye bolts.
At the center of the new design is the patent pending locking mechanism that slides to lock the bolt for faster installation, then slides back to make ready for lifting — without the need for tools.
- Available in capacities from 0.5 to 3.2 metric tons.
- Unique locking mechanism makes the lifting point well suited for quick attachment to load surface. No need for tools.
- Rated at 100% for 90 degree angle.
- Large eye opening for easy access.
- Bail that swivels 360˚ to keep load aligned with the sling leg, and maintains full WLL at any angle.
- Bolt specification for metric bolt is Grade 10.9 alloy cap screw to SO 898-1.
- Fatigue Rated® to 20,000 cycles at 1-1/2 times the WLL.
- The patent pending locking mechanism provides quicker installation, without the need for tools.
- QUIC-CHECK® mark indicates if the Crosby SL-150 Slide-Loc™ is ready for the lift.
- Forged alloy steel and Quenched and Tempered bail provides toughness in potentially abusive field conditions.
- Meets the Machinery Directive 2006/42/EC guidelines and is marked with CE accordingly.
HLM Slab Bolster Dipped, Bottom Reinforcement Stability for Concrete Foundation Slabs
$0.01HLM INDUSTRY Slab Bolster Dipped
Slab Bolster Dips are critical components designed to secure bottom reinforcement and counteract buoyant forces in concrete foundations such as slabs-on-grade, footings, and basement floors.
- Material: Carbon Steel/Stainless Steel
- Finish: Galvanized, Epoxy Coated, Plastic Protected
- Function: The Slab Bolster Dipped is a U-shaped wire support system designed to secure bottom reinforcement and resist concrete buoyancy during placement.
- Benefit: Its stable foundation anchoring prevents flotation and ensures consistent concrete cover under pressure.
- Service: Custom sizes and leg heights are available to accommodate varying foundation depths and load requirements.
HLM Slab Bolster Upper, Precision Reinforcement for Elevated Concrete Slabs
$0.01HLM INDUSTRY Slab Bolster Upper
Slab Bolster Uppers are essential components used to uphold reinforcing steel in various elevated concrete structures such as decks, footings, and slabs.
- Material: Carbon Steel/Stainless Steel
- Finish: Galvanized, Epoxy Coated, Plastic Protected
- Type: Beam Pad, Upper Beam Pad, Beam Pad with the Plate
- Function: The Slab Bolster Upper is a continuous metal rebar support designed to maintain the precise height of reinforcing bar (rebar) within a concrete slab.
- Benefit: This design allows for efficient installation, saving valuable time on the construction site.
- Service: To meet specific project requirements, customized sizes are available.
HLM Snap Hook With Eye DIN5299 Form A, Stainless Steel | Size: 4*4-14*180 | WLL:80-900
$0.01HLM INDUSTRY Snap Hook With Eye DIN 5299 Form A
DIN 5299 Form A Certified – Complies with rigorous German engineering standards for safety and performance
Integrated Forged Eye – Permanent attachment point designed for direct hardware mounting
Spring-Loaded Safety Gate – Self-locking mechanism prevents accidental release
HLM Snap Hook With Eye&Screw, Stainless Steel | Size:5*50-14*180 | WLL:100-900
$0.01HLM INDUSTRY Snap Hook With Eye&Screw
Dual-Locking Mechanism – Combines forged eyelet with screw-lock gate for fail-safe security
Industrial-Grade Materials – AISI 304/ 316 stainless steel
Vibration-Resistant – 5-turn screw collar prevents loosening in dynamic loads
Standardized Compatibility – Eyelet complies with DIN 580 for hardware interoperability
HLM Snap Hook With Screw DIN 5299 Form D, Size:4*40-14*180 | WLL:80-900 | Stainless Steel
$0.01HLM INDUSTRY Snap Hook With Screw DIN 5299 Form D
DIN 5299 Form D Certified – Meets stringent German standards for screw-gate safety mechanisms
Threaded Screw Collar – 5-turn positive locking system prevents accidental opening
Hot-Forged Eyelet – Machined to DIN 580 standards for hardware compatibility
HLM Snap Hook, Size: 4*4-14*180 | Stainless Steel
$0.01HLM INDUSTRY Snap Hook
Spring-Loaded Gate – Easy one-handed operation for fast and secure connections
High-Strength Materials – Available in AISI 304/316 stainless steel
Safety Rated – 5:1 minimum breaking load (BL) to SWL ratio for reliable performance
Corrosion-Resistant – Optional marine-grade finishes for harsh environments
Versatile Sizes – Multiple gate openings to fit various rigging needs
HLM Snap Tie 4-3/4“ End with Cone, Short End | Heavy Duty Snap Ties For Concrete Forms | Safe Working Load:2250lbs
$0.01HLM INDUSTRY Snap Tie 4-3/4“ End with Cone
Snap Ties are produced with built-in heads and come with either metal or plastic form spreaders. These ties are specifically engineered for quick and secure fastening of lumber formwork systems. They feature a standard 1-inch breakback design and include an anti-rotation mechanism to ensure clean breaking after concrete pouring.
- Material:Steel
- Wall Thickness:6″-24″
- Safe Working Load:2250lbs
- Weight:0.093-0.183kg
- Robust One-Piece Heads: Featuring durable, integrally formed heads (not welded), these construction-grade snap ties provide superior strength and longevity for demanding projects.
- Smooth Removal with Plastic Cones: The 1″ plastic cone heads allow for easy, damage-free removal from concrete surfaces while preventing rust stains, ensuring a clean finish every time.
- Performance Benefits: High-strength load retention, rust-resistant durability for heavy-duty concrete formwork applications.