HLM ,S-4088 Latch Kits, Alloy Steel | Compatible with A-327 & A-339 Grade 8 Hooks
$0.01HLM INDUSTRY S-4088 Latch Kits
To be used on A-327 and A-339 Grade 8 Sling Hooks.
Latch Kits shipped unassembled and individually packaged with instructions.
HLM 1210 Round Reverse Eye Hook, 300lb-2700lb Load | Carbon Steel | Galvanized
$0.01HLM INDUSTRY 1210 Round Reverse Eye Hook
Forged Carbon Steel — Galvanized
HLM 171 Tong Blocks, Weight: 11-35lb | Sheave Diameter: 6-12 | WLL: 1/2 to 2-1/2
$0.01HLM INDUSTRY 171 Tong Blocks
Heavy-duty forged construction with precision-machined sheaves to reduce cable wear, featuring optional marine-grade coatings for enhanced corrosion resistance. Ideal for high-load marine and industrial applications demanding maximum durability and smooth operation.
- Weight: 11-35lb
- Sheave Diameter: 6-12
- WLL: 1/2 to 2-1/2
- Steel sheaves with roller bearings and pressure lubrication.
- Forged steel eyes and hooks.
- Easy opening feature shown available in 8″ size only.
HLM 381-SY Scrap Handling Blocks, Single Sheave Design | WLL:15-40T | Weight: 285-815 | Sheave Diameter:16-24in
$0.01HLM INDUSTRY 381-SY Scrap Handling Blocks
Heavy-gauge alloy steel construction with reinforced sheave design, engineered for extreme debris handling in scrap yards and demolition sites. Impact-resistant and sealed against particulate ingress for maximum durability.
- All single point shank hooks are genuine HLM, forged alloy steel,Quenched and Tempered, and have the patented QUIC-CHECK® markings.
- WLL:15-40T
- Weight: 285-815
- Sheave Diameter:16-24in
- Durable – Allows longer continuous duty cycle.
- Can be used with magnet and drop ball.
- Single sheave design.
- Dual action hook (Swings and Rotates)
- Utilizes McKissick® Roll-Forged sheaves with flame hardened grooves.
- Furnished standard with Bronze Bushed Sheaves.
- Optional Tapered Roller Bearings.
- All sizes are RFID EQUIPPED.
HLM 416 Single Sheave with Hook, Hook Fitting | Forged Steel Swivel Fittings | WLL:2-12t
$0.01HLM INDUSTRY Single Sheave with Hook
Heavy-duty forged steel construction with integrated sheave for efficient vertical load control in tight industrial and marine spaces.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings.
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave grooves suited for a range of wire line diameters.
- Meets or exceeds all requirements of ASME B30.26 including identification ductility, design factor, proof load and temperature requirements.
Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability,not addressed by ASME B30.26.
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- “Lebus General Purpose” snatch blocks (with shackle or hook) feature an easy-to-open bolt design. The retaining bolt is released by rottating the fitting assembl , no tools required.
- HLM’s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for your application.
HLM 418 Light Champion Snatch Blocks, WLLL:15-30T | Latch-equipped | Wire Rope Size:3/4-7/8 to 1—1-1/4
$0.01HLM INDUSTRY 418 Light Champion Snatch Blocks
Meets or exceeds all requirements of ASME B30.26 including identification ductility, desian factor, proof load and temperature requirements.Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability, not addressed by ASME B30.26.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave qrooves suited for a range of wire line diameters.
- All blocks are RFID EQUIPPED
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- HLM ‘s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for yourapplication.
HLM 420 Snatch Block with Hook Fitting , WLLL:15-30T | Latch-equipped | Bearing Code: BB/RB
$0.01HLM INDUSTRY 420 Snatch Block with Hook Fitting
Meets or exceeds all requirements of ASME B30.26 including identification ductility, desian factor, proof load and temperature requirements.Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability, not addressed by ASME B30.26.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave qrooves suited for a range of wire line diameters.
- All blocks are RFID EQUIPPED
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- HLM ‘s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for yourapplication.
HLM 430 Super Champion Snatch Blocks, Wire Rope Size:3/4-7/8 to 1—1-1/4 | WLLL:15-30T | Sheave Diameter:8-24
$0.01HLM INDUSTRY 430 Super Champion Snatch Blocks
Meets or exceeds all requirements of ASME B30.26 including identification ductility, desian factor, proof load and temperature requirements.Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability, not addressed by ASME B30.26.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave qrooves suited for a range of wire line diameters.
- All blocks are RFID EQUIPPED
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- HLM ‘s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for yourapplication.
HLM 434 High Capacity Alloy Snatch Blocks, Wire Rope Size:3/4-7/8 to 1—1-1/4 | Latch-equipped | Multi-Groove Sheaves for Varied Wire Diameters
$0.01HLM INDUSTRY 434 High Capacity Alloy Snatch Blocks
Meets or exceeds all requirements of ASME B30.26 including identification ductility, desian factor, proof load and temperature requirements.Importantly, these blocks meet other critical performance requirements including fatigue life and material traceability, not addressed by ASME B30.26.
- Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
- Bolt for opening feature is retained, to ensure no lost bolts.
- Forged steel swivel tees, yokes and hooks.
- Furnished with a latch installed.
- Can be furnished with bronze bushings or roller bearings
- Center pin equipped with pressure lube fitting.
- All sizes feature sheave qrooves suited for a range of wire line diameters.
- All blocks are RFID EQUIPPED
- “All Alloy” snatch blocks feature a significant reduction in weight compared to snatch blocks made of non-alloy materials.
- HLM ‘s Engineered Solutions Group is ready to discuss your requirements and help select or develop the ideal block for yourapplication.
HLM 443 Lay Down Blocks, Weight: 12-175lb | Sheave Diameter: 4-1/2 to 6 | WLL: 1/4-1/2
$0.01HLM INDUSTRY 443 Lay Down Blocks
Low-profile forged construction with reinforced side plates for horizontal load handling in space-constrained marine and industrial applications.
- Weight: 12-175lb
- Sheave Diameter: 4-1/2 to 6
- WLL: 1/4-1/2
- All steel construction, steel sheaves mounted on antifriction bearings, grooved for maximum of 3/4″ Wireline.
- Used to lay down drill pipe.
- Hook made to fit into end of drill pipe, handy dead end becket for returning block – hooks have handle fordisengagement.
HLM 680 Construction Block Bolt Only, Wireline Sizes: 3/8″ to 1-1/4” | Single-Sheave Blocks with Thimble Dead-Ends
$0.01HLM INDUSTRY 680 Construction Block Bolt Only
Complies with and surpasses ASME B30.26 standards for identification, ductility, design factor, proof load, and temperature resistance. Additionally, these blocks exceed the standard by meeting rigorous performance criteria such as fatigue resistance, impact strength, and full material traceability.
- Wide Range of products available.
- Capacity: 5 to 100 Tons- Larger models available.
- Sheave sizes: 6″ to 24” O.D.
- Wireline Sizes: 3/8″ to 1-1/4”
- Equipped with genuine HLM forged steel, Quenched and Tempered shackles that contain the patented QUIC-CHECK® markings.
- Design Factor of 4:1.
- All 680 Series Blocks are furnished standard with Bronze Bushings.
- All 680 blocks 16″ and larger, are furnished with McKissick Roll-Forged sheaves with flame hardened grooves
- Sheaves are lubricated through center pin, with a separate lube channel to each bearing.
- Single sheave blocks have thimble dead end.
- Manufactured by an iSO 9001 and APl Q1 Certified facilit
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. lmportantly, these blocks meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
OPTIONS AVAILABLE - Roller bearing sheaves
- Hanger and Bolt Only models available
- Third party testing with certificatio
- Galvanized finish- Most model
HLM 680 Construction Block with Hanger, Sheave sizes: 6″ to 24” O.D. | with Roll-Forged, Flame-Hardened Sheaves
$0.01HLM INDUSTRY 680 Construction Block with Hanger
Complies with and surpasses ASME B30.26 standards for identification, ductility, design factor, proof load, and temperature resistance. Additionally, these blocks exceed the standard by meeting rigorous performance criteria such as fatigue resistance, impact strength, and full material traceability.
- Wide Range of products available.
- Capacity: 5 to 100 Tons- Larger models available.
- Sheave sizes: 6″ to 24” O.D.
- Wireline Sizes: 3/8″ to 1-1/4”
- Equipped with genuine HLM forged steel, Quenched and Tempered shackles that contain the patented QUIC-CHECK® markings.
- Design Factor of 4:1.
- All 680 Series Blocks are furnished standard with Bronze Bushings.
- All 680 blocks 16″ and larger, are furnished with McKissick Roll-Forged sheaves with flame hardened grooves
- Sheaves are lubricated through center pin, with a separate lube channel to each bearing.
- Single sheave blocks have thimble dead end.
- Manufactured by an iSO 9001 and APl Q1 Certified facilit
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. lmportantly, these blocks meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
OPTIONS AVAILABLE - Roller bearing sheaves
- Hanger and Bolt Only models available
- Third party testing with certificatio
- Galvanized finish- Most model